A2Z Consulting LTD is a company specialized in design, modelling and simulation of electronic systems generally and of power electronics systems especially, with an extra specialty in electric drives in all voltage & power ranges, from concept to production.
For practical implementation, realization of prototypes & measurements we take full responsibility and sub-contract/ cooperate with known established Companies.
Whether as a sub-contractor for your project design or for solving a specific problem in your project, we are here for you!
Some major A2Z Contributions can be seen below:
♦ ABB MV Drive - ACS6000
The ACS 6000 medium voltage family drive with IGCT technology, is used in most of industries where maximum reliability and high dynamic performances are required. The family of drives cover the basic power range of 3, 5, 7, 9, 11 MVA as single shaft applications and up to 36 MVA in a multi-drive with common DC bus configurations. All units operate at 3.3 kV and are fully compatible for flexible system design at limited engineering efforts. Similar to all ACS family members, medium and low voltage, the drives are DTC controlled.
♦ ABB MV Drive - ACS5000
The ACS 5000 family with IGCT technology supplies standard motors of up to 6.9 kV at power levels of 1.5 to 7 MVA (air cooled system) and 6 to 22 MVA (water cooled systems). All major high power industries are covered by the drive family, Cement, Minerals and Mining (CMM), Chemical Oil and Gas (COG) and others. The main characteristics of the ACS 5000 products are: highest reliability, efficiency of more than 98.3 %, compactness of up to 1 MVA/m3, optimal network performance.
♦ ABB MV Drive - ACS2000
ACS 2000 drive family with IGBT technology covers the general medium voltage drive market up to 6.9 kV and 400 to 1000 kVA. Achieving reliability and low maintenance costs the drive is capable to four quadrants operation with excellent network performances with or without trafo supply.
.jpg?id=3519806)
.jpg?id=3519805)
